New, improved version now shipping. Please order online to assure timely delivery.

Three 7.1 Channel Audio Inputs and One Output Switch

All channels are passively switched with no active electronics used to route audio signals.

PS3 Compatible HDMI Switch

A 3x1 HDMI switch allows full switching between a HD-DVD and a Blu-ray player and and still have an extra input for a PS3 playstation or Home Theater PC.

Digital Audio Switching

Optical and Coax audio switching is also supported with auto conversion being done between the two digital formats.

Passive Switching of Analog Signals

By using relays to route audio signals, as opposed to active analog switching ICs, we are able to achieve the same quality of signal pass through, that would be achieved by manually swapping 6 cables each time you switched between HD-DVD, Blu-ray, SACD and DVD-A players. There's no reason to compromise signal integrity for the convenience of having a remote controlled audio switch.

Extremely Configurable

The MAS7.1 can be configured as two independent switches. The 7.1 audio channels can be split to create a 5.1 channel, and a stereo audio, switch, allowing the L/R stereo signals to be switched independent of the 5.1 channel audio. The digital audio and HDMI switches, can be configured to follow the 5.1 audio or stereo audio switch, or any combination of the above.

Gold Plated Connections

Gold plated RCA connectors are used throughout the design to reduce the possibility of contact generated noise caused by corrosion.

Features Zektor's Exclusive IIR Learning

The MAS7.1 features Zektor's exclusive IIR (Intelligent Infra-Red) learning. Zektor's IIR learning allows the MAS7.1 to work with virtually any remote control! Control the MAS7.1 with an obsolete TV remote. The MAS7.1 also works great with any universal remote control.

Full Featured Remote Control Interface

A full featured IR command set is available using any remote control, including commands such as: Power Toggle, Direct Channel Selection, Channel Sequencing and for better integration with universal remotes with macro capabilities, discrete commands including Power On, and Power Off are also available.

Built-in RS-232

For compatibility with Crestron or AMX type setups, an RS-232 port included with the MAS7.1. The bi�directional RS-232 protocol allows for full control and inquiry of the current MAS7.1 state.

Auto Dimming Display

The LED indicator lights can be set to Bright, Dim, or an Auto Dim mode. The Auto Dim mode will fade the LEDs to half power about 4 seconds after a channel is selected. The bright and dim levels are user adjustable from very bright, to off.