The 291 series are small, shelf-top IR receivers with a multitude of applications. Use them as an inexpensive method of repeating IR commands when wall-mounting an IR receiver is not practical. As with all Xantech IR receivers, the 291 can tie into multiroom IR extension systems.

• Attractive case for shelf-top locations.
• Red talkback LED tests system for correct wiring as well as indicating infrared reception.
• Nominal reception angle: 45 degrees off axis.
• Attached 7' cable and 3.5 mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an "IR RCVR" or "AUX" jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc.
• Cable requirements for long lengths: Three-conductor/24 gauge up to 200', 22 gauge up to 600', 20 gauge up to 2000' and 18 gauge up to 5000' (unshielded OK).
• Maximum cable length: One mile with 18 gauge.
• Maximum current output: 100 milliamps.
• Maximum number of directly driven IR emitters:
  Up to four connected in series. (Use Xantech Connecting Blocks for emitter expansion).
• Power: 12 volts DC @ 10 milliamps.
  781RG Power Supply required (not included).
• Dimensions: 3 1/4" x 1" x 2" (83mm x 26mm x 51mm)
• Includes connecting block.