Standard version, with mini 3-conductor 7 ft. ribbon cable and separate screw terminal block (supplied).

Miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The business end of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand held remote, increasing the placement options you have.

• Infrared modulation frequency bandwidth: 30 - 100 kHz.
• Nominal reception range: > 30 feet.
• Nominal reception angle: 55 degrees off axis.
• Cable requirements for long lengths: three-conductor 24 gauge up to 200ft, 22 gauge up to 600ft, 20 gauge up to 2000ft and 18 gauge up to 5000ft (unshielded OK).
• Maximum cable length: One mile with 18 gauge.
• Maximum current output: 100 milliamps.
• Maximum number of directly driven IR emitters: Up to four connected in series. (Use Xantech Connecting Blocks for emitter expansion).
• Power requirements: 12 volts DC @ 10 mA.
• Requires 781RG or equivalent Power Supply. Dimensions: 1/2in. (13mm) diameter, 2in. (51mm) deep.