This professional series amplifier
operates with very lowTotal Harmonic Distortion (THD+N), very high
Signal toNoise Ratio (S/N+N) plus Crosstalk is greatly
minimized.Frequency Response is a very wide 20Hz to 24kHz andthe inputs
can be either balanced or unbalanced.

To
prevent speaker damage, the unit has PopSuppression upon turn on. It
also features short circuitand over temperature protection.

The
S2-101AA provides for a wide range of inputconnections including RCA
jacks, Mini-Combicon Terminal jacks and a 3.5mm single ended jack
toaccommodate PC audio inputs. The output connectorsutilize spring
loaded terminals for connection to externalspeakers.

Mechanical
construction uses the same form factor asthe companion S2 switcher
products and the S2-101AA can be rack mounted using the optional RM-220
single/dual rack mount kit.

• Accepts Balanced or Unbalanced Inputs
• Three different Input Connector types
• Frequency Range of 20Hz to 24kHz
• 10 Watts RMS of Stereo Audio Output Power
• Very Low THD and Crosstalk
• Pop Suppression upon turn on.
• Short Circuit and Over-Temp Protection
• Spring Loaded Speaker Terminals
• Robust +12VDC/4 Amp Power Supply
• RS-232 and Infra-Red Support
• Downloadable Windows® RS-232 Controller
• Optional Rack Mount Kit