C2-1200 Video Scaler is based on TV One's exclusive CORIO2™
technology and provides high quality up conversion from standard video formats to Computer or
HDTV signals. NTSC and PAL video standards are supported. Video Inputs are 2x Composite, 2x
S-Video or one YUV Component or YPbPr. A computer bypass is also provided. The output is
selectable as any computer resolution up to 2048x2048 at any vertical refresh rate and all
HDTV resolutions up to 1080p. A wide variety of computer signal formats are available to
support PC, Mac and Workstation formats.
All the functions can be controlled via the front panel Push Buttons, an Infrared
Control Remote Unit or via an RS-232 connection. A Windows Control Panel is provided and most third
party control systems interface directly with the entire C2 range of products. An On-Screen Display
is available to assist in setup.
Variable Zoom to 10X allows you to enlarge any part of the video image to fill the
entire computer screen and position controls allow you to move around to any area desired. Variable
Shrink to as little as 10% allows fitting the image onto most displays. The full bandwidth chroma
sampling insures faithfully reproduced, high resolution colors.
A 4x1 integral stereo audio routing switcher provides unbalanced inputs and output
to follow the video input selection. A rear panel terminal block provides access. The C2-1200 is
housed in a desktop case and a rackmount kit is available as an option.
C2-1250 Video Scaler PLUS has all the functions
and features of the C2-1200 and adds a wide variety of additional capabilities, including scaling
of the RGB or YPbPr input, Genlock, Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode
allows computer graphics to be keyed over an external Composite or S-Video signal or visa versa.
The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the
pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image
and external video. The PIP Mode allows the video inputs to be inset in a window over a computer or HD input.
Our exclusive AutoSet® feature takes the hassle out of setup by automatically
sizing and positioning the computer image to fit exactly on the video screen. All settings are stored
in non-volatile memory and are retained even when power is switched off.
Input Expansion is available for both models by
choosing the appropriate S2 Series product, which links to the main unit via an Options Interconnect
Cable. The routing of these additional inputs is controlled directly from the C2-1000 Series
converter’s control system. |
