 |
 |
 |
 |
Key Digital KD-PC2 BSTOCK CLOSEOUT. Internal processor card with HDMI for Pioneer plasmas.
The KD-PC2 HDMI (HDCP) digital inputs and multiple analog inputs is
a full-function digital video processor that converts input
video formats to the native resolution of the Pioneer Plasma display.
Four HDMI with HDCP inputs ensure pristine, all-digital plug-and-play
interface to Pioneer Plasma Displays. Conveniently, there are separate
analog video input connectors for RGB (HV), Component Video (YPbPr),
S-Video, Composite Video (CV).
FEATURES -- 4x HDMI w/HDCP digital inputs
- Separate analog video connectors for RGB (HV), S-Video, Component Video (YPbPr), Composite Video (CV)
- RS-232 control via the Pioneer Plasma Display:
- All-internal
connections from the KD-PC2 card to the Pioneer Plasma Display through
the Pioneer Plasma expansion card slot ensure crystal-clear HDTV images
- Sizes any video source to precisely match the display Pioneer's native resolution
- Supports all popular HD and SD source formats and resolutions, 60 Hz and 50 Hz, plus NTSC and PAL
- A true digital video processor, lets users adjust the picture with more controls than many of today Pioneer displays
- Audio lip sync delay control, to conveniently compensate audio video delay up to 10 video frames
- Firmware-upgradeable directly through the KD-PC1 15-pin VGA connector:
- Built-in Test Patterns available through the IR Remote Control, as well as RS-232
- Unit Weight: 3 lbs
- Unit Width: 11 inches
- Unit Height: 8.5
- Unit Depth: 1 inch
SPECIFICATIONS -- Specifically engineered for operation in Pioneer Plasma
Display models:- PDP-504, 505, 507, 607CMX: Native 1280x768 WXGA
- PDP-425, 434CMX: Native 1024x768 XGA
- All internal connections from the KD-PC1 card to the Pioneer
- Plasma Display via the Pioneer Plasma ES (Expansion Solutions) card slot.
Four (4) HDMI Inputs:- Select any HDMI digital input (or any analog video input)
- To support DVI-D Video I/O, use Key Digital
- HDMI<>DVI adapter cables
- Supports EDID and HDMI plug-and-play capability
- Supports HDCP Copy Protection
Individual Analog Video Inputs supported:- Select any analog video input (or any HDMI digital input)
- Separate analog video connectors for RGB (HV), S-Video, Component Video (YPbPr), Composite Video (CV)
- NTSC and PAL
Audio In and Out with individual connectors for:- Analog audio left and right stereo pair and SPDIF digital audio
- Process and scale any HDMI digital video or any analog input to match the native resolution of your Pioneer Plasma
Display:- Using world-renowned Key Digital Clear Matrix Pro technology
- A full-function, high-quality Video Processor is included
- Supports all popular source formats and resolutions
Easy to control and operate:- Easy-to-operate IR Remote Control
- RS-232 control via the Pioneer Plasma Display
- Does not interfere with the operation of your Pioneer Plasma Display
- Does not interfere with A/V sources connected directly to your Pioneer Plasma Display
Video Inputs:- HDMI Digital Video (HDMI is plug-and-play and also supports audio):
- Four (4) separate Input connectors, labeled “HDMI 1” through “HDMI 4”
- To support DVI-D Video, use Key Digital® HDMI<>DVI adapter cable(s)
- Supports HDCP Copy Protection
- Analog Video (individual analog video connectors for each of the following video interfaces):
- RGB(HV)
- Component Video (YPbPr)
- S-Video: NTSC, PAL
- Composite Video (CV): NTSC, PAL
Audio Inputs and Outputs:- Analog audio left and right stereo pair input and output
- SPDIF digital audio input and output
Video Input Formats Supported:- Supports the following popular video Input Formats:
- 720 x 480i @ 60 Hz
- 720 x 480p @ 60 Hz
- 1280 x 720p @ 60 Hz
- 1920 x 1080i @ 60 Hz
- Accepts and automatically detects 60 Hz and 50 Hz input
formats (the output frame rate will be the same as the input
frame rate), and PAL analog on the S-Video and Composite
Video inputs
Video Processing Functions:- Edge Enhancement, Brightness, Contrast
- Saturation, Tint
- Individual display Calibrations for RGB Gain and Setup
- H & V Size, H & V Position
- Zoom (Output Aspect Ratio processing), including options to
prevent monitor burn-in for Letterbox or Pillarbox images:
- Normal
- Vertical Zoom In/Out Horizontal Zoom In/Out
- Horizontal and Vertical Zoom In/Out
- Built-in Test Patterns help you set-up your video system (all
patterns available through the OSD from the IR Remote, as well as
RS-232):
- White screen Color bars
- Gray scale Horizontal wide ramp
- Vertical wide ramp
- Status and Control
- Stores your custom settings for each HDMI and analog video input
- Easy-to-operate IR Remote Control
- RS-232 control via the Pioneer Plasma Display:
- Compatible with Crestron, AMX, Elan, Control4, Xantech
- Firmware-upgradeable directly through the KD-PC1 15-pin VGA connector:
- The Firmware Upgrade cable provided with the KD-PC1 must be used
- Built-in Test Patterns available through the IR Remote Control, as well as RS-232
Connectors:- HDMI Digital Video (also supports audio):
- 4 x HDMI Type A 19-pin connector
Analog Video:- RGB(HV): mini D-sub 15-pin connector
- Component Video (YPbPr): 3 x color-coded RCA female connectors
- S-Video: 1 x S-Video connector
- Composite Video (CV): 1 x RCA female connector
Audio:- Analog stereo Left & Right Audio:
- 1 x stereo mini jack input
- 1 x stereo mini jack output
SPDIF digital audio:- 1 x RCA female connector input
- 1 x RCA female connector output
- RS-232C: D-sub 9-pin on the Pioneer Plasma Display
Included Accessories :- Two (2) Audio cables
- One (1) special Firmware Upgrade cable
- IR Remote Control with batteries
Mechanical:- Product size: 11.2” x 8.6” x 1.0”, fits in the ES (Expansion Solutions) Slot of the Pioneer Plasma Display
|
|
 |
 |
|
 |
|
 |

|