Integrate 4 HDTV Sources with 4 HDTV Displays

The 4x4 HDTV Matrix is perfect for integrating multiple high definition video sources with multiple displays, for optimal behind-the-scenes control of multi-room or multi-location high definition video systems. You assign each source to a display with a remote or wire control with each source accessed immediately upon selection. It works with all HDTV sources and displays equipped with DVI (digital visual interface). It requires no complex networking and is simple to install and operate. Beautiful high definition video is fully supported.

The 4x4 HDTV Matrix switcher has four DVI inputs and four DVI outputs. You connect your four sources to the 4x4 HDTV Matrix's inputs using supplied cables, then connect your four displays to the Matrix's outputs. There are four DVI outputs connecting to four different displays.

To use with HDMI devices, Gefen supplies DVI to HDMI Adapters for video only.

Notes: Switching is done by using the RMT-4 wired remote, RMT-16IR remote or by one-wire serial control.

The HDTV Matrix is HDCP pass-through.

Features:

• Save time by enabling all four sources readily accessible at all times
• Maintains highest definition DVI video with no loss of quality
• Supports Apple ADC displays when used with the DVI to ADC Conversion Box
• Rackmountable

Specifications:

• Video Amplifier Bandwidth 1.65 GHz
• Single Link Range:1080P/1920 x 1200
• Vertical Frequency Range: 60 Hz
• Input Sync Signal: 5 Volts p-p (TTL)
• Video DVI Output Connector: DVI-I (29 pin)
• USB Input: USB type "B" Connector
• USB Output: USB type "A" connector
• Power Supply: 24 VDC
• Dimensions: (13"in./330.2mm)W x (8.7"in./220.98mm)H x (6.7"in./170.18mm)
• Rackmountable: 4 Rack Space
• Shipping Weight: 10 Lbs

Package Includes:

• the 4x4 HDTV Matrix
• RMT-16IR
• Four 6ft DVI Cables
• One 24v Power Supply
• User's Manual