The wait is over! NO PC NEEDED!!!!
For only $159 (and no PC required), you can have a new HDTV set-top box for every HD or SD television in your home or office! Using advanced IC fabrication , the ASTC-100 boasts a small footprint of only 7.75" x 5.2" x 1.6" and uses only 12W of power.
Stand-alone unit -- NO PC REQUIRED!
No need fussing with PC-based units requiring a dedicated PC. PC solutions require you to install drivers, software, update video drivers, etc, just to watch HDTV. This full-featured solution costs LESS than most HDTV tuners that require a PC yet provides stunning, full-HDTV resolutions with one easy-to-use product. Its small size and low cost means you can have HDTV anywhere and free from the need to lug a PC around. Using a simple DC adapter, you can easily take the ATSC-100 mobile or install it in your car for the ultimate mobile HDTV experience!
The highly integrated design incorporates the latest advances in SMT fabrication and ATSC reception including EIA closed-captioning, which is not found on others costing 2x or more! Flexible output resolutions and aspect ratios allows the ATSC100 to work with all HD televisions, and SD televisions too.
The ATSC-100 Digital Terrestrial HDTV Receiver provides an inexpensive yet high quality way to view local, off-air HDTV transmissions either on a device capable of displaying YPbPr component HDTV signals or on a standard definition, analog television via its Composite Video (CV) input. Stereo audio outputs are available and comprehensive On Screen Displays allow the user to control the unit as well as view the Electronic Program Guide (EPG).
Multiple profiles can be created and stored so that the image will be best for the type of programming viewed and closed captioning is fully supported as well as V-Chip parental content control.
Automatic channel scan is standard and individual channels can also be added manually. Audio levels are fully adjustable and a Favorite Channel list can be constructed so that it isn't necessary to scan through channels that are of no interest to the viewer.
Displayed aspect ratios may be either 4:3 or 16:9 and the unit can be controlled via panel mounted switches as well as Infrared remote control. A transmitted resolution display is provided so that the viewer can instantly determine when High Definition programming is being provided by the broadcaster. Output resolution can be set to 480p, 720p or 1080i in the YPbPr mode as needed for the type of display being used. |
